ATCA Rear Transition Module (RTM)
The ART998 is an Ethernet pass-through ATCA Rear Transition Module (ARTM) that provides GbE to the rear. The module is designed to mate with Vadatech ATC998 front board.
ATCA Rear Transition Module
The ART801 is a Rear Transition Module (RTM) that brings expandability to the VadaTech ATC800 GbE switch. The RTM has a Micro-DB15 which routes the I2C busses to the rear for Shelf Management of the chassis devices.
ATCA Rear Transition Module
The ART800 is a Rear Transition Module (RTM) that brings expandability to VadaTech’s ATC800 switch board. The ART800 provides additional connectivity for eighteen GbE ports. The ART800 brings the Shelf Monitoring port to the rear via a Micro-DB15.
Ten Fiber Video with Five Fiber USB 2.0
The ART340 provides Ten Video outputs via single strand of fiber SC style per each of the Video channels that are coming from the zone three. The ART340 module converts and transmits an uncompress DVI video signal over 300 Meter cable.
ATCA Rear Transition Module (RTM) for ATC139
The ART139 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides GbE, and Management I/O for the front blade. The module is designed to mate with the ATC139 ATCA Carrier.
Rear Transition Module (RTM) for ATC133
The ART133 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides GbE, 10 GbE, and Management I/O for the front blade. The module is designed to mate with the ATC133 ATCA Carrier.
ATCA Rear Transition Module
The ART132 is an I/O expansion ATCA Rear Transition Module(ARTM) that provides PCIe, GbE, InfiniBand, USB andManagement I/O for the front blade. The module is designed tomate with Emerson front blades such as ATCA-7360 andATCA-7365.
ATCA Rear Transition Module
The ART131 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides PCIe, 10GbE, and GbE to the front blade.
Rear Transition Module (RTM) for ATC121
The ART121 is a Rear Transition Module (RTM) I/O expander for VadaTech’s ATC121. It includes dual 10GbE, Layer 2 managed switch, USB 2.0 and USB 1.1 interfaces and I2C buses to read chassis CDM, Temp sensors, etc.
ATCA Rear Transition Module (RTM)
The ART120 is a Rear Transition Module (RTM) I/O expander. It includes dual 10GbE,Layer 2 managed switch, dual USB 3.0, Video In/Out and I2C buses to read chassis CDM,Temp sensors, etc.
ATCA Rear Transition Module (RTM) for VT994
The ART119 is an I/O expansion ATCA Rear Transition Module(ARTM) that mates specifically to the VT994 backplane. The module provides dual USB and Management I/O for the front blade through the VT994.
ATCA Rear Transition Module
The ART110 is a Rear Transition Module (RTM) that brings expandability to the host board. The ART110 has single GbE L2 switch fabrics with XAUI interfaces to the host. This design allows complete isolation between the two XAUI ports by configuring the ports into their appropriate VLAN.
ATCA Rear Transition Module
The ART108 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC108, ATC104, etc. carrier board. The ART108 is a passive RTM that allows for Management RS-232 serial interface and PCIe x4 lanes for expansion.
ATCA Rear Transition Module
The ART105 is a Rear Transition Module (RTM) that brings expandability to the VadaTech ATC109 carrier board. The nine port managed layer two switch provides four GbE 10/100/1000-BaseT ports, two GbE fiber ports and two GbE to Zone 2 of the ATC109 front board.
ATCA Rear Transition Module
The ART104 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC104 carrier board. The ART104 is a passive RTM that allows for Management 10/100Mbit Ethernet, Management RS-232 serial interface and PCIe x4 lanes for expansion.
ATCA I/O Rear Transition Module (RTM)
The ART001 is an I/O expansion ATCA Rear Transition Module (ARTM) that provides GbE, 10 GbE, PCIe and Management I/O for the front blade. The module is designed to mate with any ATCA Carrier.
ATCA Ethernet Pass-through Front Board
The ATC998 is an Advanced Telecommunication Computing Architecture (ATCA) passthrough module for GbE. The ATCA998 routes 8x 1000Base-T Ethernet from the front panel to a Rear Transition Module (RTM) through the Zone 3 connector.
|